It is all too easy to overlook the importance of your plumbing system. However, when something is used on a daily basis, wear and tear is unavoidable, and frequent maintenance is required. As any plumber will tell you, it is important to understand how to detect problems with your plumbing so that you can address them as soon as possible and call a plumber if needed. If a small clog or leak is allowed to worsen, it may quickly become much more severe, resulting in expensive repairs. Even if there is no apparent danger of broken pipes, floods, or a polluted supply, inadequate plumbing maintenance may cost you money. Small leaks and loose fittings cause the system to lose water over time, affecting your water pressure and the quality of your supply.
Many common plumbing problems, fortunately, are readily detectable if you know what to look for. Here are some common warning signals, as well as actions you may do to reduce or avoid additional damage to your property.
Puddles and Leaks
A accumulation of water anyplace in your home is one of the most apparent signs that something is wrong. If a room seems wet or mould grows, it is worth examining concealed pipes for leaks. Looking in cabinets, under furniture, and crawlspaces may be necessary. It could be a radiator leak or a leaky tap, check anything that uses water.
Of course, if you discover a pool of water or see anything leaking, it is likely that you have a broken pipe or a clog. In the event of a leak, isolate the affected pipe by cutting off its water supply. If the problem is a clogged drain, you may be able to remove the obstruction by hand or using a plunger.
The buildup of things such as hair, oil, and food, on the other hand, may need a more severe technique, such as drain snaking. Use caution when using chemical drain cleaners, as many include corrosive chemicals that may harm the inside of your pipes.
You should also be particularly cautious of backed-up sewage, which may represent a severe health danger if not treated properly. If you detect a sewage leak or accumulation, see a professional before trying to repair it. You can call a plumber from Elite Group anytime if you’re based in the North East.
Water of poor quality
A drop in the quality of your water supply is another indication that something isn’t right. Even after allowing it to settle, if it starts to taste odd, has an unpleasant odour, or appears discoloured, your supply may be tainted.
This may indicate that your pipes have internally rusted, which could potentially impact your water pressure. If your water tastes metallic or if you detect rust-like particles, your plumbing system is probably in need of an upgrade.
Damage to your primary supply may also be a source of contamination. Roots and the slow shifting of the soil over time may cause subterranean pipes to fracture or pull apart. As a consequence, dirt and other debris may enter your water supply, lowering its quality. Depending on the degree of the problem, a drain snake may be able to clean the pipe. Otherwise, the damaged parts may need to be repaired or replaced.
Pipes that are too loud
If air gets stuck in your pipes, it may cause internal pressure to rise. This puts pressure on your plumbing, loosening joints and fittings and possibly increasing the likelihood of pipes breaking or becoming distorted. This is a simple issue to identify since trapped air causes pipes to rattle and moan when water flows through them.
Running the taps should flush out the air pockets and decrease noise. However, if the condition continues, you should seek expert help, since the rattling may indicate a more severe problem.
If water comes to a sudden halt, it may cause a reverberation back up the pipe, putting pressure on its joints. This may cause portions of pipe to loosen or distort over time, resulting in floods and serious damage to your house. Fortunately, this is often addressed by making small changes to your pipe setup. You may also reduce noise by cushioning troublesome areas with foam or lagging material. If you’re unable to remedy the issue yourself, call a plumber.
Taps are running slowly
Of course, low pressure may be just as annoying as high pressure, and it might indicate a blockage, pump failure, or leak. Water providers are required by law to provide water at a specified minimum pressure. This varies according to your nation, town, or city. Many properties, however, get their supply at a lower pressure than they should.
Reduced flow from your taps is one among the first indications that your pressure has decreased. Furthermore, fixtures and appliances that need low-pressure water, such as certain shower heads, may stop working.
Contact your provider to verify that the problem is not caused by a failure in the main supply or a temporary interruption in service. Alternatively, if you discover evidence that your pipes are clogged or broken, if you call a plumber they should be able to advise you on how to resolve the problem and restore your supply. Consider adding a pressure gauge to help you monitor the health of your system and detect issues before they do any harm.
Finally, if you haven’t examined your system in a while, there’s a high possibility that something has to be repaired. Regularly checking that connections are tight, pipes are insulated, and drains are clean may significantly decrease your chances of experiencing a catastrophic breakdown, flood, or power outage.
Many of these tasks may be completed on your own, but if you are uncertain about any element of your system’s upkeep, contact your local plumber. Annual drain snaking will also aid in keeping your main and sewage lines clean, which is an important step toward maintaining the long-term quality of your water supply.
Finally, the most essential step in maintaining your plumbing in excellent operating condition is to address issues as they occur. A well-maintained system is much less likely to break down or flood your house, and it will eventually save you money via a combination of improved efficiency and fewer emergency repairs. Accidents can happen, so make sure you know where your mains stop valve is in case of an emergency. Call a plumber to maintain your system today, many local companies offer care plans to keep your home plumbing systems in good shape.
Check out our blog on how to avoid a plumbing emergency for more top tips.